The manufacturer tells you how to use the plaster line equipment

Linyi Zhou Xing gypsum line equipment manufacturer tells you how to use plaster line equipment

When we operate some equipment need to pay attention to the details we cannot be complacent, we have to remember that the four notes, so in the daily operation of the process does not appear abnormal fault.

User how to better operation, we have heard the details determine success or failure, equipment daily operation as well, improve the operation process, the correct details can help mill more efficient production

For a longer life, explain the details of the equipment that the equipment needs to pay attention to

First, users should pay attention to the manufacturer of professional and technical personnel training arrangements, transfer operation, precautions, troubleshooting methods, after the training, the user should arrange for gypsum line equipment

Professional and technical personnel take care of them, try to be trained personnel or experienced staff members, so that they can avoid accidents and cause problems in daily work.

Second, after buying gypsum line equipment, to develop effective management rules and regulations, carry out regular inspection, machine maintenance, in addition, mill run after a period of time, to conduct a comprehensive inspection of the equipment.

The wearing parts grinding ring, grinding roller, roller blade, generally no more than 500 hours to be replaced, the largest scrap limit of 10mm, if you wear is still in production, prone to accident fault. Roller mill

In change, the roller bearing should be thoroughly cleaned in the roll sleeve, and then the new lubricant is added, and the damaged parts should be replaced in time.

Of material third, the fineness of the product should be controlled, uneven thickness of the machine is not good, the speed is the key control fineness analyzer, according to user needs to adjust the fineness.

Fourth, we must have the correct process of starting and stopping the gypsum line equipment. We must first open the equipment and put the materials in order, and the sequence process of the components and components when the machine starts to stop.

An effective method of life. Downtime and trimming should also be used to clean up the equipment, especially in the grinding room, which can not have other foreign objects.