Gypsum line production process is the most important step is to release, but also is a headache for people, because one will not pay attention to break, so we should pay particular attention to the stripping. In this plaster line manufacturer, a few of the demoulding techniques can be used to solve this problem well.
1, the gypsum line mold cleaning clean, no residue, and the gypsum material will be poured into the stone mold. Second, after a certain time, take the shelf off and slowly peel the mold from the bottom. Note that in this step, it must be slow and stable so as to ensure that there is no fragmentation when the mold is removed.
2, in order to ensure the smooth separation of the plaster line from the mold, there is a key technology to use the gypsum stripping agent before pouring into the gypsum material. That is to say, after cleaning the mold, you need to paint a plaster mold release agent on the mold. This is mainly because after it is applied, it can be completely separated from the mold.
The gypsum line manufacturer tells the plaster line to have the skill and method to make it perfect. In this way, it can ensure that it is not broken.