Gypsum line manufacturer

How does the gypsum line manufacturer take care of it?

Gypsum line manufacturers of gypsum line repair first with high quality gypsum powder adding gypsum line special glue paste, stir well, in the use of blade paste on the basis of the meridian line, gypsum carving on it, when a little hardness, water brush water, but for the decoration of gypsum wall repair not everyone can do. Secondly, if the color of the plaster line is not satisfied, we can use the paint to refresh.

If the plaster line not long or do not pay attention to accidentally stained with the stain, we can do this: first for a little stain, use a knife to gently scrape the surface layer; but if it is stained with ink, and deep penetration, will ink at digging, and then use the gypsum slurry a good tune to fill, to be dried, with fine sandpaper draw; but filling gypsum and gypsum raw tone is not the same, will affect the appearance, so that manufacturers can use the whole line of gypsum plaster line from a new coat of paint, it will clean white plaster line (PS: this anymore. The steps to find the best experienced workers to operate)

Gypsum line European classical style decoration with classical and white color beauty, a long time will certainly be dust, dust in the treatment of gypsum plaster line manufacturers with the line, gypsum line manufacturers should use clean duster or soft brush gently brushing, or with a clean soft cloth to wipe, pay special attention to is not with a wet cloth to wipe,or more wipe the more dirty .