How to maintain the plaster line packing machine?

How to maintain the plaster line packing machine?

The plaster line packing machine pays attention to the transmission and the maintenance and maintenance of the control line. This is mainly to avoid the conditions caused by the manual negligence of the line being pulled, rolled and so on. Also, the mechanical upper board, down board and other components need to reciprocate, and may have a certain impact on the line. This requires checking the integrity of the line and the tightness of each interface, relatively simple.

Wipe each probe to ensure that the probe is not covered by dust, resulting in inaccurate positioning. At the same time to pay attention to the wear of the saw blade, the saw blade saw the timely replacement of gypsum

The fastening of the motor and other parts. These parts are usually fixed by screws and easy to repair.

The wear of the sliding parts of the plaster line packing machine. There will be some friction in the use of machinery, especially for the automatic PVC gypsum ceiling production line, the upper plate machine, the down board machine, the code plate machine and the palletizing machine. It is necessary to check the slideways, slideways and sliders regularly. If the wear is serious, it needs to be replaced in time. These parts do not require large disassembly of the machinery, and the replacement is simple.

Pay attention to the tightness of the chain and other transmission parts, and make appropriate adjustment according to the production conditions.

When the pressure of the plaster line packing machine is unbalance, the force on both sides of the plasterboard will be different and the speed is different, so the deviation will occur. In this case, it is necessary to adjust the pressure between the various pressure rollers. If the machine is used for cylinder control, it is necessary to adjust the telescopic distance of the cylinder.