The manufacturer tells you the selection of the plaster line

How can Zhou Xing gypsum line production equipment talk about cleaning the stains on the plaster line?

Gypsum line mold is too long, or if it is not noticed in the process of storage, it will smear stains. The star gypsum line can be processed according to the situation.

For a small piece of dirt, it can scrape the thin layer on the surface lightly with a small knife. If ink stains are stained and deeper, it is necessary to dig out the ink spots.

Then fill it with the plaster that has been adjusted. After drying it, make a flat with fine sand paper. The plaster in the filling will be incompatible with the hue of the plaster mold.

It will affect the beauty, and in this case, you can go over the whole statue.

Method to add water plaster is: put 50 grams of lime stir in 1500 ml of water, then the gypsum products soak 3 to 10 minutes, and then removed, washed with water

2~5 times, after drying, finally sprinkled with some chalk powder, the plaster looks as white as before.

If the gypsum line traces for many years, very dirty mold, cannot use the method for processing. The plaster mold can be immersed in a 1000 milliliter soap.

Water with 10~30 ml of ammonia water, gently washing for about 20 minutes, take out with clean water and clean it. If it is really dirty, it will not be clear in this way.

Wash clean, you can apply a layer of imitation copper color on the plaster mold and make it into a bronze statue, which is more elegant and elegant.