Automatic heat shrinkable machine

Why should the automatic heat shrinkable machine be maintained?

If the heat shrinkable machine automatic shrink machine drum in the work before and after the move, the M10 screw bearing soldier to the proper position just before the school. If the gear axis traverse, please adjust the bearing frame behind the M10 screw to the proper position, adjust the gap to the bearing sound, hand turn the pulley to proper tightness is appropriate, too tight or too loose can make the machine damaged may.

The automatic heat shrinkable equipment should be selected for dry and clean indoor use. It should not be allowed to contain acids or other corrosive gases in the atmosphere.

Must regularly check some machine parts, such as: half a month or once a month, check the site: worm gear, worm, lubrication block bolts, bearings and other activities, look at these flexible and wear parts rotate, found defects should be repaired, shall not be reluctant to use.

If the packaging machine is not used for a long time, the body parts of the machine must be clean, smooth coated with anti rust oil, covered with cloth punta. If the equipment is not used for a long time, it is necessary to check whether the parts of each part can be opened before use.

After the use of the automatic heat shrinkable machine, the rotary drum should be taken out for cleaning and cleaning the remaining flour in the hopper, and then installed to prepare for the next time.