Automatic film mulching machine

An analysis of the possible failure of the full automatic film mulching machine

The surface of the work piece is broken and not smooth or the corner can not be wrapped. The film is not straight, the quality of the film is not good, the workpiece is not well polished, the glue is sprayed too much, and the template on the bottom of the workpiece is too low.

The film suction machine is not in place: vacuum is not enough, air leakage is not enough, the temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the depth of the workpiece is deeper than that of the membrane, the suction time is too short, the film is not pulled up, and the workpiece distance is too close.

The work vacuum does not come up: the air road is not through, the hand valve or the solenoid valve is not closed, the vacuum pump motor belt is loose and the vacuum table is damaged.

The film is pulled down when the suction is not reached: whether the solenoid valve or the hand valve is opened.

The temperature measurement is inaccurate: whether the thermocouple or thermostat is wrong or damaged or not;

Automatic film mulching machine does not start: inline input wire, power line connection, voltage insufficient

Sucking phenomenon: the temperature is too high, the heating time is too long, the quality of the film is not good, and the temperature is not heated

The application of full automatic film mulching machine is more extensive, whether it is packaging or printing, the product's post printing can not help with the film mulching machine. When the film mulching machine works, it is unavoidable to meet some failures, but the problem should be found in time so that the operator can find it in time and maintain it in time.