Full automatic PVC panel packaging machine scope of application:
The production line of this paper sticker is specially designed for sticking PVC decorative paper and paint paper on the upper surface of plank board (such as density board, particleboard, iron plate, gypsum board, marble board, etc.). It has the characteristics of flat facing, no starting, no wrinkle and high efficiency.
The sticker machine (film mulching machine) is suitable for all kinds of density board, MDF and fireproof plate on the surface of various colors of wood grain paper, lacquer paper, aluminum foil and so on. The machine is automatic gluing, baking, gluing, cold pressing, hot pressing, cutting and continuous operation. It has a high degree of automation, good veneering effect and no need to pressurize with other devices. It is the ideal equipment for veneer plaster factory and decorative material company.
The main features of the automatic PVC panel packaging machine are as follows:
1. the machine sets all automatic glue, paper, dust, glue, sticker, hot press and film.
2. it is shown that the dust removal system is equipped with a corresponding vacuum cleaner to make it flawless.
3. each independent single machine has an emergency switch to avoid accidents.
4. the pressure forming can be used to control the size of the surface force, and the old type paper machine is completely eliminated by using the spring to do the single pressure.
5. variable frequency speed regulation is equipped with high power motor to make the whole speed of the machine as a whole, and the interval of each plate is consistent when working.
6. coating is used to surpass the clutch device, which shows that the coating is more uniform.
7. cold and hot pressed in one can be immediately used in sheet forming, not glue.
Workpiece size: 1220 x 2440mm
Working voltage: 380V/50HZ
Drive speed: 0-25m/min
Maximum width of the workpiece: 1300mm
Fuselage size: 12000*1950*1700mm
Machine weight: 2800kg