Technical requirements of gypsum line in production process

Gypsum line is a kind of common decoration decoration materials, gypsum powder and a certain proportion of the mixed water is poured into the mold can be made with a variety of patterns, and the addition of fiber increased toughness, fire prevention, moistureproof, heat insulation, sound insulation, heat insulation function, practical and beautiful, good decorative effect, low price. Gypsum line is used in the ceiling and the ceiling and wall angle, it can be through the wire, with cover, improve the appearance of the house. Because plaster powder is soft and easy to break, so the production process of gypsum line is strict, otherwise some quality defects will appear.

The common quality problems are the following:

One, sand hole. When the water is too dry, the water absorbability is too strong and easy to appear when the water is too strong.

Two. Stomata. The gypsum pulp is too dry and not completely compacted, and it is mixed into the air to produce air holes.

Three. Crack. The plaster line manufacturer loosened the module during the production of the gypsum line, or it was easy to crack in the long time of overexposure.

Four, rough. The demoulding agent in the plaster mold is too little, which causes the mold to be bonded to the gypsum line, resulting in the roughness of the surface of the gypsum line.

Five. No light. The uneven agitation of the gypsum slurry and the too much use of the isolator will lead to a dull and glossy surface of the plaster line.

Six, scar. If the plaster paste is too tight with the mold, it is easy to remove the gypsum on the surface of the plaster line when it is demoulding.

The Interior Gypsum decorative materials is increasingly respected by people, such as gypsum board, gypsum ceiling, gypsum line and so on, the gypsum line because of its simple and elegant appearance, fashionable and changeful style, reasonable price, for a few years after the cleaning brush, will make the room full of a new, become the interior decoration the material of choice. There are a variety of shapes of gypsum line for your choice, such as gypsum Jiaxian, gypsum, gypsum, gypsum c.flower flat line lamp panel and so on, gypsum line with different shapes in different parts of the application, the gypsum line according to the size, height, but is not arbitrary. The following little editor tells you the details of the plaster line.

Gypsum and gypsum flat line from flower to decorate the house size and style, but the gypsum lamp is different, gypsum lamp are mainly installed in the middle part of the roof of the interior, with the use of to improve the appearance of the chandelier, housing. Because the lamp plate is only suitable for the discharge of the chandelier, the indoor room height below 2.6 meters is not suitable for the plaster lamp plate. When choosing gypsum decorative line, we must choose products with clear lines, bright colors, artistic sense, no damage to the surface, clear and clean products, otherwise, the beauty of the houses will be greatly discounted.