The main types of plaster lines based on different uses and materials

Now many people think that there is only one type of plaster line, but it is not. From the professionals who have been engaged in the plaster line for a long time, we know that there are so many kinds of it.

A: is the construction of decorative gypsum as main raw materials, adding a plate made of a variety of fiber materials, the decoration picture. For example, gypsum printing board, perforated ceiling board, plaster relief ceiling board, gypsum plaster line, decorative plate and so on, it is a new interior decoration material, suitable for middle and high grade decoration, and has the characteristics of light weight, fire prevention, moisture-proof, easy processing and simple device.

Two, fiber properties: build gypsum as the primary raw material, and add excess fiber reinforced data, the bending strength of this plate is higher than plaster line, it can be used for internal walls and partitions, but also can replace wood manufacturing furniture.

Three, the nature of the paper: the gypsum slurry is a kind of lightweight sandwich plate armor for a double-sided paper. Gypsum line light texture, high strength, fire prevention, moth proofing, easy processing. The general paper plaster line is used for inner wall, partition wall and ceiling. The water resistant paper surface plaster line at the end of the fire treatment can be used for the room wall with a larger humidity.

With the development of technology, the installation process of plaster line is constantly changing. But the most commonly used and most basic installation processes are two main types:

One is the nail line installation process: first, drill 2 10 millimeter holes on the plaster line mold, and one person press the gypsum line, and one person uses self tapping nail to fix it. The corner of the wall is fixed first, and the wooden side needs to be treated as a slope based on the size and shape of the plaster line, and the plaster line is drilled and then fixed with a self tapping nail. More than 15 cm above the gypsum line on the wall must be drilled, with quick stick powder stick, then screw fixed.

The other is point mounting technology: the base putty must be removed, and the cement mortar plastering layer will also be exposed to avoid plaster line falling. Use the glue to adjust the powder quickly, use the point type installation, but the point interval can not be too big. After the line is attached to the angle by the angle, we must press the pressure for more than one minute and apply the finger to fill the gap that can be seen. Then you can dip it in the brush.