Analysis of the reasons for the difference in the price of gypsum line produced by the gypsum line manufacturer

Analysis of the reasons for the difference in the price of gypsum line produced by the gypsum line manufacturer

Many people pay attention to the price of plaster mold, and there are three main reasons for the difference of the plaster mould price.

, a material of different proportion

We all know a thing, such as gold, the higher the purity of the price may be higher. For example, the down clothes, the amount of cashmere also determines the price is different. So is the plaster mold, and the difference in the material is one of the reasons that affect the price.

The complexity of two, production process

This is the reason gypsum line of mould price. If a product is produced after more than a dozen processes, the produced product is absolutely fine. On the contrary, if only one process is produced by an ordinary product, the product is definitely rough.

Three, the size of the manufacturer

This is the factors decide the price level of the gypsum line mold. If the manufacturer can produce 100 tons per year, the price will be lower, because the larger the factory scale is, the higher the production volume will be.

Plaster line equipment

The indoor plaster decoration materials are more and more widely used. In terms of its characteristics, it is clean, neat, beautiful, bright, clear and rich in lines. After a few years after cleaning the brush, it will make the room new.

Gypsum decorative materials should choose indoor ordinary room height to three kinds: Jiaxian, flat wire, corner and lamp, room lamp disc height below 2.6 meters is not suitable, because the lamp is only suitable for the chandelier. In the selection of plaster decoration line, we must choose the lines of clear, bright, surface not broken, concave and convex clear, clean. Before installing the line, the wall should be cleaned first. The original slurry should be soaked and removed, and the 2*2cm wood keel should be fixed on the corner of the wall. Then the plaster line should be fixed with a suitable length screw.

In the fixed indoor building adhesive plaster line coated on the back, or with 107 glue and plaster powder and paste, but with the easy-going, otherwise will dry, and then fixed with screw points, screw eye fixed and other exposed reinforcing cracks, joints and diagonal lines that gypsum according to flower type and lines link up with putty flat, such as putty dry with fine sandpaper lightly polished and net, in the paint coating before, should be in different parts of the room by lacquer putty, sanding and sweep, finally painted two times, paint application paibi, and used only mixed with talcum powder, putty and plaster fiber a small amount of powder and 107 cellulose gum, with warm water to open, fully mixing, use baskets coating selection for inner wall paint or paint. Because of its simple construction, good quality and low price, it is very popular.