The plaster line equipment factory teaches you how to choose the plaster line

The plaster line equipment factory teaches you how to choose the plaster line

1. plaster line selection to look at the depth of the pattern

Gypsum line equipment manufacturers introduce the general plaster line decorative patterns of the concave and convex patterns should be above, and the production of fine. In this way, after the installation, then the surface brush paint treatment, still can maintain the three-dimensional sense, embody the decorative effect. If the pattern of the plaster line decoration is shallow, only around, the effect will be much worse.

2. plaster line buy and buy the thickness of the product

Gypsum line products must have corresponding thickness to ensure their intermolecular affinity to the best degree, so as to ensure the useful life and the integrity and safety during the use period. If the plaster line decoration products are too thin, not only is the service life short, but it also affects the safety.

3. plaster line selection and purchase of surface light and clean

Because of the pattern of the plaster line decorative product, it can't be grit when the paint is installed, so the surface finish is higher.

4. plaster line buy and buy to see the price

Gypsum line equipment manufacturers introduce cheap gypsum line products at a price of 1/3 to 1/2. Although this low price is attractive to the user, it is often found to show defects (such as yellowing and cracks) after installation and use, causing regret.

Gypsum line equipment manufacturers can gently tap the plaster line with fingers. If the sound is stuffy, they are mostly inferior plaster lines. If the sound of knocking is crisp or even ceramic like, then the quality of this gypsum line is good. Check the gypsum board elastic, hand percussion, a real voice that gypsum board as a very tight and durable, empty voice board Konggu phenomenon, and the texture is not good. Hand weigh weight can also measure the pros and cons of gypsum board.